General model's info
3D MODEL DESCRIPTION
 
All bite and all fun, this feisty predator is ready to chomp its way into your heart (not literally, we promise)!
 
Liked what you see? This model was designed by @angeljacobofigueroa
 
This STL file is recommended for FDM Printers!
3D Printing Time : Monocolor - 03 Hours 08 Minutes*  (may vary according to you printer model)
                              Multicolor - 10 Hours 21 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 03 colors)
Approximately Height: 8 cm
 
*Note: Printing time based on a Bambu P1s printer, according to our tests.
 
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
 
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height:  0.2 mm
Recommended Layer Height:  0.2 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 5% (Gyroid)
Needs Support: No.
Build Plate Adhesion: No.
 
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!