General model's info
3D MODEL DESCRIPTION
 
Oh look, a platypus. Wait… Pierre, the platypus?!
 
This STL file is recommended for FDM Printers!
3D Printing Time : Monocolor - 01 Hours 06 Minutes*  (may vary according to you printer model)
                              Multicolor - 06 Hours 05 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Approximately Measurements: 05 x 10 x 1,5 cm
 
*Note: Printing time based on a Bambu P1S printer, according to our tests.
 
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
 
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height:  0.12 mm
Recommended Layer Height:  0.12 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: No.
 
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!