General model's info
3D MODEL DESCRIPTION
 
Crack open this sardine can again and again, zero smell, all satisfaction.
This STL file is recommended for FDM Printers!
3D Printing Time : Monocolor - 01 Hour 04 Minutes*  (may vary according to you printer model)
                              Multicolor - 01 Hour 37 Minutes*  (may vary according to you printer model and the amount of colors in your AMS, in this print we’ve used 04 colors)
Approximately Measurements: 06 x 04 x 01 cm
 
*NOTE: Printing time based on a Bambu P1s printer, according to our tests.
 
    ATTENTION: Note: This model has a built-in magnet slot, and to insert it, a print pause must be scheduled at the corresponding layer.
    IMPORTANT: If your nozzle is metal, it may attract the magnet. A drop of super glue might be necessary and this model you will need 6x neodymium magnets measuring 5x2 mm. More                                            information in the "How to Slice" video.
 
3D PRINT FILE SETTINGS (FOR 0.4 MM NOZZLE)
 
Line Width/ Nozzle: 0.4 mm
First Layer Line Width: 0.48 mm / 120%
Average Speed: 20mm/s (First Layer) / 50mm/s (All the other layers) (Ender like) | 20 mm/s (First Layer) / 250 mm/s (All the other layers on Bambu Lab)
Recommended Initial Layer Height:  0.16 mm
Recommended Layer Height:  0.16 mm
Recommended Perimeters/ Walls: 3.
Recommended Infill (%): 10% (Gyroid)
Needs Support: No.
Build Plate Adhesion: No.
 
The parameters above are recommendations made by our staff; if you prefer, you can adapt them according to your preferences.

Happy Printing!